Continuous visual flow between rooms
Reinforced microcement floor system
CemerFloor
A seamless mineral-floor concept for residential, hospitality and selected commercial interiors.
Product overview / 01
Interior floors
CemerFloor coordinates substrate preparation, reinforcement, finish and traffic-rated protection as a single floor assembly. Final loading, slip, thickness and service limits remain subject to the approved technical specification.
Features
Layered, reinforced system approach
Compatible finish and protection schedule
Benefits
Supports restrained, material-led interiors
Reduces visual interruption from finish changes
Project-specific slip and maintenance planning
Technical specification
System at a glance.
The table defines the product’s role without publishing formulation-dependent values before technical approval.
System typeReinforced mineral floor assembly
Primary useInterior residential and selected commercial floors
Finish characterContinuous, low-sheen, hand-finished
Traffic / slip valuesProject-specific; verify current TDS and tested assembly
Manufacturer valuesMixing, thickness, coverage, pot life, cure and performance: current approved TDS only
Content accountability
Reviewed before publication.
This page is reviewed and approved by Ben Basirat, Founder & Principal, drawing on 30 years of construction and architectural-coating experience. Formulation-dependent values remain governed by the current approved TDS, SDS and project specification.
Application guide
Five controlled stages.
This is a design-level sequence, not a substitute for the current installation guide, TDS, SDS or project specification.
01 · Assess
Confirm the substrate, exposure, movement, moisture and service conditions before specification.
02 · Prepare
Confirm strength, flatness, moisture and movement; mechanically prepare where the approved specification requires it.
03 · Build the system
Install the specified primer, reinforcement, base, finish and traffic-rated protection as a complete assembly.
04 · Finish
Apply the selected texture and colour within the approved coat sequence and recoat windows.
05 · Protect
Apply the approved traffic protection and follow the controlled cure-to-service schedule.
Finish options
Character is built by hand.
Texture, movement, sheen and colour are approved together on a physical sample. Natural hand variation is part of the intended finish.
01
Soft concrete
02
Mineral cloud
03
Fine aggregate
Colour selection
A restrained mineral palette.
Cloud 01
Linen 02
Sand 03
Travertine 04
Clay 05
Mineral 06
Smoke 07
Carbon 08
Screen colours are indicative. Final approval requires a physical sample made with the selected system and protection.
CemerFloor documents
Request the current controlled revision.
Draft or incomplete technical documents are not presented as final downloads. The current approved revision is supplied for the project and market of use.
Technical Data Sheet
Current controlled revision
Safety Data Sheet
Current controlled revision
Installation Guide
Current controlled revision
Product Brochure
Current controlled revision
Colour & Texture Guide
Current controlled revision
Coverage Guide
Current controlled revision
Maintenance Guide
Current controlled revision
Packaging & Specifications
Current controlled revision
FAQ
Questions before specification.
01Where can CemerFloor be used?+
Use is limited to the applications and substrates listed in the current approved CemerFloor Technical Data Sheet and project specification.
02Can I choose a colour online?+
The digital palette establishes direction only. Approve a physical sample made with the selected texture and protection system before production.
03Who should install the system?+
Installation is intended for trained professional applicators working from current controlled documents and an approved project sample.
04How is coverage confirmed?+
Coverage depends on substrate, layer build-up, texture and approved formulation. Use only the current TDS and a project sample calculation.
Related systems
Build the full material story.
01Interior wallsCemerWall
A continuous mineral finish for calm, tactile interior walls and architectural features.
04Bathrooms & wet areasCemerBath
A coordinated wet-area finish for bathroom walls, selected floors, vanities and integrated details.
09Heavy-traffic & garage floorsCemerIndustrial
A project-engineered floor direction for garages, workshops and selected heavy-use interiors.
CemerFloor
Review your project with us.
Tell the Vancouver head office about the application, substrate, location, programme and desired finish. We will identify the next technical step.
info@cemerart.com ↗